AMR Interface Equipment
ISO 9001
Certified
Heavy Duty Split Scissor Lift
​
• 2,500 LBS capacity.
• Split Scissor Bridge design for AMR Compatibility.
• Structural steel base frame with anchor brackets to mount to the floor.
• Crowders to locate companion pallet.
• Safety skirting.
• Two (2) hydraulic lift cylinders.
• 11.5” lowered lift height.
• Lift vertical travel: 24".
• Lift fully raised height 36".
• Air operated hydraulic pump.
• Two (2) velocity fuses to protect table from free fall in the event of hydraulic failure.
• Pressure line retention bracket.
• Lift power up, gravity down.
• Lift is designed for high cycle with high duty composite bushings at all pivot points.
• Cam followers riding on replaceable wear strips.
• Painted to customer specifications.
• Lamacoid attached to each lift with serial number and capacity information.
• Keeper plates, no pull pins for shafts.
• Access holes in frame for maintenance for disassembly and reassembly of wear items.
• General maintenance accessibility.
• Control gravity Bars.
Heavy Duty Single Scissor Lift for AMR Fork Truck
​
•Available in both pneumatic and hydraulic configurations.
•4,000 LBS capacity (Evenly distributed).
• Structural steel base frame with anchor brackets to mount to the floor.
• Customizable Top Plate with mounting holes.
• Maintenance chock.
• Encoder mounting bracket.
• Bellows accordion safety skirting.
• One (1) hydraulic cylinder or airbag lift.
• 11” lowered lift height.
• Lift vertical travel: 25" limited to 24" with limit switch.
• Lift fully raised height 36".
• Internally mounted 24 vdc power unit with control circuit.
• One (1) velocity fuse to protect table from free fall in the event of hydraulic failure (for hydraulic variant).
• Lift power up, gravity down.
• Lift is designed for high cycle with high duty composite bushings at all pivot points.
• Cam followers riding on replaceable wear strips.
• Painted to customer specifications.
• Lamacoid attached to each lift with serial number and capacity information.
Heavy Duty Crowders and Guides
​
• Customizable to any application requiring crowders or guides.
• Welded tube steel construction with heavy duty wall thickness.
• End stops.
• UHMW or equivalent guides.
• Painted to customer specifications.
AMR Interface Carts​
Henshaw specializes in the design and build of custom AMR interface carts. All of our cart designs can be customized to your specific application. They include AMR interfaces specific to the AMR manufacturer. Carts can include special features such as rotation, lift, tilt, and more.
​
• Welded tube steel construction with heavy duty wall thickness.
• Include AMR interface specific to ARM manufacturer.
• Heavy duty casters with locks.
• Can include tow bar for tugger or recovery.
• Can include manual push bar.
• Options for pallet rotate, lift, tilt, etc.
• Painted to customer specifications.